CYCLONE UPDATE`S

DOWNLOAD NA
http://www.gsmfilehosting.com/ewi61ojd1jyz.html

ENJOY

Cyclone Installer v1.01 30-03-2009 (2009-04-02)

- One click downgrade repair for BB5 added. Works on phones which after downgrade failing to boot (hang up on NOKIA screen) - this includes phones which dont had patched 308 before flashing. No need to full erase, etc. Just one click and 20 seconds, fast, and safe.
- SX4 Bypass added. If phone can't be authorized due to corrupted superdongle key or server problems, you can use this to write protected PM Records (1, 309). No need to full erase, etc. Fast and safe.
- DCT4 "SIMLOCK SERVER" Relock fixed (5000, 2630)
- Check Flashing Bus for BB5 Added
- Fixed registration process, when blank arguments are used
- Fixed registration process, when invalid input data are used (i.e. special Russian chars)
- Fixed invalid date/time problem while box maintenance (upgrade) on some timezones
- Added in "Settings/General" option to skip box selftests (use when box selftest subsystem is damaged)
- Resellers list during registration is now displayed in ascending order
- Skin Stack updated to v6.21
- Added DCT4plus new security unlock patches
RH-116 7070p v6.82 - new security
RM-258 2760 v6.82 - new security
RM-298 2630 v6.82 - new security
RM-340 2600c v6.82 - new security
RM-362 5000d v5.27 - new security
RM-362 5000d v5.45 - new security
RM-392 2680s v6.82 - new security
RM-394 1680c v6.82 - new security
- USB Drivers updated to 1.0.0.3, this no more conflicting MicroBox
- Versions snap
Installer v1.01
Main x86 Application v1.0.0.6634
x86 Memory Manager v4.92
Native USB Drivers v1.0.0.3
USB-COM Stack Drivers v1.0.0.0
Onboard Secure Bootloader v2.08
Onboard Main Nokia Application v1.00
Onboard Security Card Revision v1.09
Nokia Connectivity Cable Drivers v7.1.8.0
BB5 USB/FPIF Single Line/FPIF DualLine v20090315 (Mixed)
DCT4 FPIF Single Line/USB v20090315 (v7.4.77.0)
DCT4 Unlock Patches v20090326
Communication Stack SSLv3-keys-06092008
Skin Stack v6.21
Download link: http://www.cyclonebox.com/downloads/CycloneBoxInstaller.exe

Cyclonebox installer v1.02 (2009-05-02)

Hello, major update is ready to release. ====================== == Installer v1.02 == ====================== - RAP3Gv2 PA_SL - SP Initialization added (unlock, SP Rebuild)
- RAP3Gv3 PA_SL - SP Initialization added (unlock, SP Rebuild)
- RAP3Gv3 PA_SL2 - SP Initialization added (unlock, SP Rebuild)
- RAPIDO PA_SL - SP Initialization added (unlock, SP Rebuild)
- RAPIDO PA_SL2 - SP Initialization added (unlock, SP Rebuild)
- SX4 Bypass added after PA_SL2 Unlock, if needed
- "Create RPL from phone" added. This is used to backup possible security data from phone in original NMP RPL format (plain one) this includes WMDRM Backup, All low-level certs (Nokia Public Certificate, Common Configuration Certificate, Hardware Certificate, VARIANT Cert), and Original SIMLOCK (only on PA_SL2 Phones !! ), which can be used to simlock restore / counter reset / PM 308 recreate - if needed - this data is sent directly to SIMLOCK SERVER directly so SL recreate is 100% "legal"
- Added Codes Counter Reset for PA_SL2 phones. Used to reset Keyboard/FBUS Code Counter.
- Added BB5 NCK Code FBUS Send (#pw+xxxxxxxxxxxxxxx+y), use especially when Keyboard counter is locked.
- Added BB5 NCK COde KEYBOARD Send (#pw+xxxxxxxxxxxxxxx+y), use especially when FBUS counter is locked.
- BB5 SL Export added. This exporting phone configuration key + simlock blocks to "SL5" file
- BB5 SL Import added. Used to import previously exported "SL5" structure to phone upon BB5 SP Initialization.
- BB5 PM -> Simlock RPL added, if PA_SL2 phone - use if simlock has been corrupted, and you have only PM backup. If PM have needed fields, it will create plain RPL file which can recreate simlock for you without headache.
- SL5 Creator support for Creating Relocked SL5 for desired MCC+MNC / Profile Bits
- Added "BB5_Autolock_IMSI.sl5" in UnlockData. Use with IMPORT SL5 in order to AUTOLOCK BB5 phone to IMSI (one sim card).
- Added "BB5_Autolock_MCCMNC.sl5" in UnlockData. Use with IMPORT SL5 in order to AUTOLOCK BB5 phone to MCC-MNC (operator).
- BB5 Plain RPL Write added.
- Added "UB Backup" option while writing BB5 Plain RPL (SIMLOCK AREA), since they aren't adding SHA-1 before SIMLOCK_DATA in RPL file - it needs be skipped in case.
- Added "Erase Security" option before RPL write. This is used when phone have problem with PM 308 blocks (downgrade, for example) and can't boot to accept superdongle / simlock data - in case, no need to full erase in case. Keep note that after RPL write YOU NEED SX4 Authorization with server and writing PM Fields 1 and 309. Otherwise your phone will fail to pass ST_SECURITY_TEST, and in effect will not boot.
- Skin stack updated to v6.30, this is more stable and fast
- Product code send added
- HWID send added
- PSN send added
- DCT4 Nand MASS MEMORY Partitioning added before write. May be skipped ticking apporiative Skip MM Part button.
- When no patch file found, SW will generate unlock codes for DCT4 unlock (asics 2,5,6,7)
- Security Code Mastercode is now being generated upon read info
- Added "Skip Patching" Option. Use for DCT4plus phones which are patched already, and all you need is to Initialize SP locks again (relock, etc)
- DCT4 NCK Key / FBUS Count is now being readed correctly
- DCT4 UEM OTP Imei Read added
- DCT4 SP Locks are being parsed upon read
- Added full support for Vista OS
- Added support for 64bit CPUs - tested on X64 XP Professional, should work on NT6 too
- BB5 Simlock backup before flash write no more asking user for directory, it's automaticlly saving to StoredFiles - BB5 Simlock backup automatically saving backup in RPL format if possible (PA_SL2 phone detected), otherwise it will save it in PM format
- BB5 Booting routines totally refactorized
- After DCT4 Page erase, the last-error-status is now queried from phone
- Data checksum is now being checked again upon BB5 Flash Write
- When NPC Certificate are being backed up during SX4 Bypass, it is now stored as "PUBLIC_ID.Sx4Bypass.NPC.CMT.CRT", not "DowngradeRepair" as before
- When Writing BB5 Cert, it's now default pointing to StoredFiles - User is now being warned before "Erase all certificates" - BB5 (avoid mistakes)
- For now, Erase All Certs erasing APE certificates too, if APE unit found
- DCT4 Plus 2680 v6.82 unlock partial fixed
- 2630 v57.20 Unlock added
- 2630b v57.20 Unlock added
- 2630b v06.82 Unlock added
- 2760b v06.82 Unlock added
- 2600c-b v06.82 Unlock added
- 1680c v06.82 Unlock added
- 1680c-b v06.82 Unlock added
- 5000db v 05.27 Unlock added
- 5000db v 05.45 Unlock added
- Included old "new security" unlock partials for 2630, 1680, 5000, 2680 - v6.82
- FastMM problem after exiting Main Application fixed
- Some DCT4Plus unlock bugs fixed (like This is Invalid Integer...
- Added WD2 CBUS BT Phones support (bluetooth flashing problems)
- Check Flashing Bus (BB5) now booting phone completly, not only fetching 1st Boot Data
- Fixed problem when sometime wrong CMT / APE bootloader are being selected upon Certificate Operations
- Increased FBUS Timeout to repair FBUS transactions problems on some environments
- Netmonitor activation on DCT4/WD2 added
- WD2 Format User Area added
- "Initial SP corrupted" fixed on DCT4plus phones
- After finished flashing the sound now being played;)
- Cyclone HW Revision A112 support added
- Progressbar issue fixed while BT Flash
- SX4 Server Transaction fixed
- Bigger delay added after SX4 Bypass in order to handle PM write correctly
- More debug messages is now being shown upon BB5 booting
- Refactorized DCT4 ADSP Flashing routines
- DCT4 / BB5 Factory defaults after flashing fixed in some cases
- Minor changes and bugfixes
- Improved BB5 Local/Test mode changes
- Support : Fixed "Connection closed gracefully" in some cases
- Fixed problems when invalid IMEI are being readed out from phone (in case of phone wasn't initialized and FBUS problems occured) - PM Write routines rewritten
- Security card is now being resetted before phone flashing, this have effect on authenthication speed when flashing many phones one by one
- Selftests routines improved (dynamic timeout)
- Multiple files can be now choosen upon Writing Certificates saved as "CRT" (Cyclone binary format)
- BB5 SP Locks now being parsed upon read out (blocks count, block content, etc)
- DCT4Plus partials with version 6.82 have now removed from supported UPP list ASIC ID "3168" which is not unlockable (for now) with rom 0600 to avoid destroyed phones (no signal), in case you will got message "Not supported UPP ID", but your phone SL area will be untouched and after flash it will still work.
- Blue screen of death fixed on some configurations
- After PM Write, Statistics added, so user can easily see how many PM Record written OK / NOT OK
- IMEI in "Credits" upon calculation is now checked for validity (last digit)
- Updated Message before using DCT4 RPL Credits - ASIC 11 takes 2 credits and rest 1 credit
- Main Nokia Firmware v1.03 avaiable, this changes:
-- TX2 Output pin is now constant (Service Pin 3) due to many mistakes on user side.
-- Flash write speed optimized, should be around 10% - 30% faster, especially on NAND-ONENAND phones. More optimizations to come. -- Erase status is now signalized by USB (red) led.
-- Added support for WD2 CBUS BT Flashing
-- BB5 Booting Improved on some environments
-- RTOS Code Updated to 5.2.0
-- Microcode USB Stack is now Vista compatible
-- Removed blue screen of death problem on some XP configurations
-- Minor bugs, fixes, and improvments
- Versions snap
Installer v1.02
Main x86 Application v1.0.0.7396
x86 Memory Manager v4.92R2
Native USB Drivers v1.0.0.4
USB-COM Stack Drivers v1.0.0.0
Onboard Secure Bootloader v2.08
Onboard Main Nokia Application v1.03
Onboard Security Card Revision v1.09
Nokia Connectivity Cable Drivers v7.1.8.0
BB5 USB/FPIF Single Line/FPIF DualLine v20090315 (Mixed)
DCT4 FPIF Single Line/USB v20090315 (v7.4.77.0)
DCT4 Unlock Patches v20090502
Communication Stack SSLv3-keys-06092008
Skin Stack v6.30
!! WHERE TO DOWNLOAD !!
Download Mirror 0 :
http://rapidshare.com/files/228313546/CycloneBoxInstaller.exe
(TRAFFIC SHARE Download - download without logging into Rapidshare Premium zone, free - no wait and limits) Download Mirror 1 :
http://www.cyclonebox.com/downloads/CycloneBoxInstaller.exe
** SOME NOTICES **
!! UPGRADE YOUR BOX FIRMWARE to version 1.03 !!
Of course we can't force you to do that, but you will loose some functionality (CBUS Flashing, UEM Reading, VISTA Support, etc). !! UPGRADE YOUR BOX DRIVERS TO VERSION 1.0.0.4 !!
Drivers should be updated automatically after installation using DPInst, but who knows. !! ABOUT INSTALLATION !!

You don't need to uninstall previous installation. Just install this version and It will automatically purge previous one (delete old drivers, loaders) and install just new one. Best regards,

more to come in next week,
cyclone box Team




+ Cyclone BOMB ! Standalone : SX4 Emulation, SD Repair, RPL Calc, BB5 NCK Calc, more!!!
New version of Cyclone Box Software is ready. There is a lot of changes, here is
(2010-02-12) -MORE-
+ Cyclonebox STANDALONE BB5 NCK Calculator Released!
- Added STANDALONE, FREE (NO LOGS, NO INTERNET!!!) NCK Reader (levels.. pw1..7)
(2010-01-24) -MORE-
+ Cyclonebox hotfix released

-fixed bug for old BB5 phones

copy new exe in X:program filesCy
(2010-01-05) -MORE-
+ Cyclone Shot, "HASH 9DD" Unlock, V30/V300 unlock, Simlock rebuild and mor
Hi, First of all, happy new year to all of our customers.
New Cyclone Inst
(2010-01-02) -MORE-
+ 06-11-2009 New Cyclonebox Firmware Released
New Cyclonebox Nokia firmware is uploaded to our server.

Box Firmwar
(2009-11-06) -MORE-
+ Cyclonebox Nokia firmware was uploaded
New Cyclonebox Nokia firmware was uploaded to our server.

Signature:
(2009-10-30) -MORE-
+ !!! 26-10-2009 Cyclone Update Strikes Again !!!

Tropical Cyclone Strikes Again !
MAKE SURE YOU UPDATE YOUR BOX FIRM
(2009-10-26) -MORE-
+ Asic 3168 - 7100,2323,2330,2720 -FREE UNLOCKING Ready

Added support for unlock/relock/autolock of DCT4+ Asic 3168 phones, suppor
(2009-09-10) -MORE-
+ 13-08-2009 Next Bulk Update, RAPU-YAMA supported for FBUS Flash
- Introduced support for FBUS Flashing RAPU YAMA phones (5630, 6700, 6303)
(2009-08-26) -MORE-
+ Cyclonebox bulk update released
New Bulk Update for Cyclone Box is ready, this includes:

1. New Cycl
(2009-08-10) -MORE-
+ Cyclonebox pre beta released
-Added Unlock & NCK read code for BB5 SL2 phones ,5800 , N96 , E75 etc
-Add
(2009-06-22) -MORE-
+ CycloneBox Firmware v1.04 AVAIABLE !
New firmware revision was just compiled and uploaded to our server
Cyclon
(2009-05-11) -MORE-
+ New DCT4Plus phones Supported for Unlock/Relock
Added

2680 v06.31
2680b v06.31
5000d v06.17
5000d-b
(2009-05-09) -MORE-
+ Cyclonebox installer v1.02
Hello, major update is ready to release. ====================== == Installer
(2009-05-02) -MORE-
+ Cyclone Installer v1.01 30-03-2009
- One click downgrade repair for BB5 added. Works on phones which after downgrad
(2009-04-02) -MORE-
+ New security DCT4plus SUPPORTED
Hello, from now we support direct unlocking (no downgrade, etc) for following n
(2009-03-26) -MORE-

New DCT4Plus phones Supported for Unlock/Relock (2009-05-09)

Added

2680 v06.31
2680b v06.31
5000d v06.17
5000d-b v06.17
Download update pack from:
http://rapidshare.com/files/231002906/NewDct4PUnlockData_Cyclone_5May.rar
And put in your "UnlockData".
Best Regards,
CycloneBox Team

CycloneBox Firmware v1.04 AVAIABLE ! (2009-05-11)

New firmware revision was just compiled and uploaded to our server
Cyclone Nokia Application v1.04, (May 12 2009 00:28:13, gcc-4.2.2, RTOS v5.2.0), Type: Signed Production Application, Flags: CONST-TX2-PIN ; VISTA-SUPPORT

We have rewritten DCT4 booting routines (and finally reproduced 1680c booting problems).
That means 1680c and other phones booting problems was solved. Upgrade your boxes and DCT4 booting problems will go away. As usually each customer having 2 update credits,
so if something will go wrong during update (power failure, etc, etc, etc),
just go back and Maintenance your box again.


NOTE :
To upgrade your box, it needs be booted into bootloader mode.
Best way is to disconnect USB cable and connect it again.
Box will launch in bootloader mode, and now you can use
"Maintenance box" function from "Maintenance" module,
thus will upgrade your box.


Best Regards,
Cyclonebox Team

Cyclonebox pre beta released (2009-06-22)

-Added Unlock & NCK read code for BB5 SL2 phones ,5800 , N96 , E75 etc
-Added INI selection for bb5 flashing
-GUI redesign
-other major bug fixed
Download Link
http://www.cyclonebox.com/downloads/Cyclone7828NCK.rar


Note : Update you box firmware first and extract all files in
cyclonebox folder


wbr
CycloneBox Team

Cyclonebox bulk update released (2009-08-10)

New Bulk Update for Cyclone Box is ready, this includes:

1. New Cyclone Box Firmware v1.06 is avaiable on our server, upgrade it through Box Maintenance

- BB5 Booting for 5800,N97,5220 and others fixed
- Fixed problem when box has been hanging up during BB5 boot
procedure.
- Meaning of "Repower on boot" button has been inverted. That means,
BB5 phones are now by default repowered during boot (more stability while dealing with dead / stucked / unbootable phones).
- Fixed box stability during 1208 flash and CP extract, no more "Failed to set Flashbus baud"

- General Improved FBUS Stack stability
- Code revised - Small speed improvment during BB5 TX2 Flashing
- Minor changes/bugfixes
2. Support for new DCT4Plus phones unlock/relock/autolock:

RM-305 1650 v5.91
RH-105 1208 v5.91
RH-105 1209 v5.91
RM-298 2630 v7.60
RM-299 2630b v7.60
RM-258 2760 v7.60
RM-258 2760b v7.60
RH-64 1600 v6.46
RH-92 1100ib v6.46
RH-93 1100i v6.46
RM-291 v06.81 (missing partial)

5. New DCT4 Loaders v7.49.00 introduced, this adds support for new flash chips.

6. Added new DCT4 UEM CBUS Loaders - ASIC11 UEM IMEI Read problems fixed.

7. New BB5 Loaders introduced, adds support for new flash chips. Note that greatly speed improvment was noticed during flash RAP3v3 phones with "slow" samsung flash chip - 00ec2208 - this includes 5200,5310,etc.

8. Old updates also included in this bulkupdater, this includes BB5 RAPIDO NCK Calculator, and DCT4Plus Unlock patches released before (after installer):

RM-392 2680 v6.17
RM-393 2680b v6.17
RM-392 2680 v5.28
RM-393 2680 v5.28
RM-362 5000d v6.31
RM-363 5000db v6.31

Download bulkupdater from :
http://cyclonebox.com/downloads/CycloneBulkUpdate10082009.exe

Run it and click INSTALL, all patches will be applied automaticlly.
Best Regards,

13-08-2009 Next Bulk Update, RAPU-YAMA supported for FBUS Flash (2009-08-26)

- Introduced support for FBUS Flashing RAPU YAMA phones (5630, 6700, 6303)
- GUI Stability improved ; updated Skins Stack
- Fixed Algoboot for BB5 phones in some configurations
- SingleLine BB5 Flashing Speed improved (upgraded to 5.5mbits from 4mbits)
- BB5 Multi-CRT Write bug fixed (mismatched certs when writing more than 1 certs at one time)
- Improved Phone LOCAL/TEST Mode Entry algorithms during unlock and FBUS operatinos
- Access Violation in some configurations, when changing BB5 Vpl / Dct4 Vpl Variant/Product - fixed
- "Set factory defaults - BB5" are now default unticked after flash (useless in case of BB5 phones)
- Repower on boot inverted ; accoring to firmware v1.0.5 , BB5 Phones are now default re-powered on boot
- By default - USE DEFAULT PROFILE while unlocking DCT4Plus is unticked

- DCT4Plus unlock routines rewritten - patch file is now applied before unlocking
- Fixed problems upon unlocking some units of DCT4(plus) phones, when Initial SP Area is corrupted
- When SIMLOCK IS NOT ACCEPTED during BB5 RPL Write, software trying to write FBUS part again after FLASHBUS part, so if NPC is corrupted, the SL will be restored anyway
- Please don't use "Erase Security" function when writing BB5 PA_SL2 RPL, because SIMLOCK will not be accepted in such case! In order of simlock rebuild, NPC MUST BE CORRECT!
- Improved BB5 RPL Write, when HWC can't be written (N96 - example), other certs being written and whole procedure is not being skipped
- After sending Simlock and Superdongle data, delay added, so PA_SL can recalculate SP and Recreate 308 if needed (previously it wasn't working all times)
- During BB5 Configuration Parse (flash chips, status), now RAM chip is displayed instead of UNKNOWN
- DCT4Plus Security Status is now being displayed upon unlock - either TAMPERED or NOT TAMPERED
- When DCT4Plus Security is NOT TAMPERED, Cyclone automatically makes Security Backup
- When user trying to unlock phone which have protected PM308 Security Block against modification, and there is message "Failed to write Security Block" software is now automaticlly writing back NPC backup - IMEI
- Erase Security while writing RPL is now by default disabled
- SX4 Bypass during PA_SL2 unlock is now by default disabled
- IMEI 1234567890?, and "?" is not valid integer bug fixed
- Cyclone Box HW Rev A113 support added
- Cyclone Box HW Rev A114 support added
- Cyclone Box HW Rev A115 support added


NOTE : we have recently changes our hosting service so actual date of this release is 13-08-2009 but we have updated the news section today, so please bare with us

Note on flashing RAPU units: make sure you obtained CORRECT FBUS CABLE! UFC No.2 (As we tested) NOT working with RAPU phones, because MBUS line is duplicated. We recommend to use GPG FBUS cables, as we done our tests using their cables.

This is BULK UPDATE, that means you need to download EXE file and click INSTALL. All previously released updates (few days before, rapido nck calc, etc) will be applied automaticlly, loaders will be purged too. You need have only installed installer (this one released in May, avaiable in
http://www.cyclonebox.com/downloads/CycloneBoxInstaller.exe

Download new update from:
http://rapidshare.com/files/267002877/CycloneBulkUpdate13082009.exe
Best Regards,

Asic 3168 - 7100,2323,2330,2720 -FREE UNLOCKING Ready (2009-09-10)


Added support for unlock/relock/autolock of DCT4+ Asic 3168 phones, supported models/versions for now:

7100s RM-438 v5.22
7100s RM-438 v5.41
7100s RM-438 v6.31
2330c RM-512 v6.46
2330c RM-512 v6.75
2323c RM-543 v8.20
2323c RM-543 v6.75
2323c RM-543 v6.46
2630 RM-298 v57.20
2720 RM-519 v8.20

Not supported model/version of ASIC3168 phone here? Send us MCU File and we will update it !
Unlocking is FREE.
It is FIRST standalone solution (without usage of internet).
Before usage it is very important to UPGRADE YOUR BOX FIRMWARE (to version 1.07).

However, we added new service called "Super DCT4" inside a box. To unlock ASIC 3168 phones, your box needs be "Super DCT4" activated (this will also let you change DCT4/plus IMEI in future). The activations is done automaticlly in "Credits" tab and cost 50 credits - keep note that box, comes 100 credits that mean if you haven't spend all logs on DCT4 RPLs, activation is FREE.


Download link
http://rapidshare.com/files/278378463/CycloneBulkUpdate11092009.exe

!! 26-10-2009 Cyclone Update Strikes Again !!! (2009-10-26)


Tropical Cyclone Strikes Again !
MAKE SURE YOU UPDATE YOUR BOX FIRMWARE BEFORE USE OF NEW PARTIALS ; OTHERWISE IT WILL FAIL TO SEND SUPER DCT4 EMULATOR

Added support for new ASIC 3168 phones/versions, for now Cyclone supports following phones:

RH-86 2610 v07.04a
RH-87 2610b v07.04a
RM-258 2760 v06.82
RM-258 2760 v07.60
RM-259 2760b v06.82
RM-259 2760b v07.60
RM-298 2630 v07.60
RM-298 2630 v57.20
RM-299 2630b v07.60
RM-299 2630b v57.20
RM-340 2600c v06.82
RM-340 2600c v07.60
RM-341 2600c-b v06.82
RM-341 2600c-b v07.60
RM-391 2760h v05.45
RM-392 2680s v06.17
RM-392 2680s v56.17
RM-393 2680s-b v06.17
RM-393 2680s-b v56.17
RM-394 1680c v06.82
RM-394 1680c v07.60
RM-395 1680c-b v06.82
RM-395 1680c-b v07.60
RM-438 7100s v05.22
RM-438 7100s v05.41
RM-438 7100s v06.31
RM-438 7100s v06.32
RM-439 7100s-b v05.22
RM-439 7100s-b v05.41
RM-439 7100s-b v06.31
RM-439 7100s-b v06.32
RM-512 2330c v06.46
RM-512 2330c v06.75
RM-512 2330c v08.20
RM-513 2330c-b v06.46
RM-513 2330c-b v06.75
RM-513 2330c-b v08.20
RM-514 2320c v06.75
RM-514 2320c v08.20
RM-515 2320c-b v06.75
RM-515 2320c-b v08.20
RM-519 2720f v08.20
RM-520 2720f-b v08.20
RM-543 2323c v06.75
RM-543 2323c v08.20
RM-544 2323c-b v06.75
RM-544 2323c-b v08.20

Download updater from :
http://rapidshare.com/files/298129931/CycloneBulkUpdate26102009.exe

!!! MAKE SURE YOU UPDATE YOUR BOX FIRMWARE BEFORE USE OF NEW
PARTIALS ; OTHERWISE IT WILL FAIL TO SEND SUPER DCT4 EMULATOR !!

Br,
Cyclone Team,
More comming shortly !!

Cyclonebox Nokia firmware was uploaded (2009-10-30)

New Cyclonebox Nokia firmware was uploaded to our server.

Signature: Cyclone Nokia Application v1.09, (Oct 28 2009 15:56:27, gcc-4.2.2, RTOS v5.2.0), Type: Signed Production Application, Flags: NoFlags

Upgrade your box as usual using Box Maintenance functions. To enter box bootloader mode which allows firmware rewriting, re-plug it from USB socket.

Fixed problem when box failed to start sometimes after upgrade (Box is not in needed mode), and other little fixes too.
To all users who had non-starting box since last upgrade (especially HW A110/A111 owners), please upgrade it with current firmware and post results.

Each box have now 2 SecurityArea upgrade credits, and 3 MainFirmware upgrade credits. Should be enough in case of problems. For more contact SiRoYa, Cyclonebox or Honey.

Cyclone Shot, "HASH 9DD" Unlock, V30/V300 unlock, Simlock rebuild and mor (2010-01-02)

Hi, First of all, happy new year to all of our customers.
New Cyclone Installer v1.03 is ready (final installer, no bulk updates needed).

===================== Installer v1.03
02.01.2010
=====================
- Added new BB5 Unlock,Relock,Autolock,Repair Method by RPL Generation, this uses server and consumes 10 logs whilst your credits amount must be > 100.
- Supported are ALL PA_SL2 Phones, both RAPv3 and RAPIDO, with following hashes:

9A28E119033B91D14D22838C86D0D53C
9DDBFCFE6E73CED7D8C6268C8EB85723
38F312750F686F9FC9B1B3778774A195
BAF3A9C3DBFA8454937DB77F2B8852B1
CAEEBB65D3C48E6DC73B49DC5063A2EE
F2D76DFAFD66C7F195F278417DF05888
F682624FFB08F6D955DBE7D9C0485084
FCB5C510AF7F09F313D9BDE85A707CC0

- Before unlock software will ask you (when possible) if you want RPL calculation. If you don't need unlocking by RPL, simply click NO and old free unlocking methods will be used (PM308+120 recalc, Secure RAM dump and NCK calc on RAPIDO PA_SL2 phones, etc). However there are some phones which might be unlocked only using new method (9DDB - 3600,5220,7310, or new 5800 >v.30, new N96, etc)
- After unlock, requested RPL file will be saved to STORED FILES dir, it might be used later after phone chip erase, etc - as a generic backup
- To Autolock/Relock use "Import SL5" function and point to SL5 array file in "UnlockData" dir, with SW comes few generated files
- If you need SL5 file for your network, use "Create SL5" button and enter MCC-MNC, SL5 file will be generated for you and your phone might be relocked
- SL Area might be repaired using UNLOCK button for SL2 phones
- RPL Write bugs fixed ("simlock not accepted" after few tries)
- Path "/" problem fixed
- Memory manager updated to v4.94
- New skin manager introduced (6.53) - removed flash files selection bugs
- GUI redesigned a bit
- Nokia Connectivity Cable Driver updated to v7.1.22
- 2760h RM-391 v06.83 Unlock / Relock added
- 2330c RM-512 v09.55 Unlock / Relock added
- 2330c-b RM-513 v09.55 Unlock / Relock added
- 2720f RM-519 v08.42 Unlock / Relock added
- 2720f-b RM-519 v08.42 Unlock / Relock added
- 2720f RM-519 v09.55 Unlock / Relock added
- 2720f-b RM-519 v09.55 Unlock / Relock added
- SX4 Bypass during BB5 Unlock removed, is no needed anymore
- Fixed USB stack hanging up on some Windows configuration due to invalid hexcodes in BoardCode Revision USB Field
- After Super DCT4 Activation in Credits tab box Security Page is automaticlly upgraded, no need doing it manually
- New firmware v01.15 introduced - box can switch itself from MAIN mode to BOOT mode (no USB reconnect needed anymore)
- 6220c,3600s booting fixed in new firmware
- New Secure bootloader v02.10 introduced
- New bootloader supports more types of smartcards (autobaud, PTS protocol negotiation, etc)
- Secure BootAgent v1.00 introduced in new firmware
- Firmware RTOS Code Updated to v6.0.1
- Slightly code optimizations and stability improvments in new firmware
- Secure Bootloader upgrade introduced after box maintenance
- Added support for Cyclone box HW REV A116, A117, A118, A119, A11A, A11B, A11C


New Setup is ready at support page or u can download from alternate link
Download Link: http://rapidshare.com/files/329084437/CycloneBoxInstaller.exe

! BOX FIRMWARE UPDATE IS NEEDED TO USE LATEST UPDATE !

Best Regards,
Cyclone Team

Cyclonebox hotfix released (2010-01-05)


-fixed bug for old BB5 phones

copy new exe in X:\program files\Cyclonebox


Download Link : http://rapidshare.com/files/330741437/Cyclone.zip

Cyclonebox STANDALONE BB5 NCK Calculator Released! (2010-01-24)

- Added STANDALONE, FREE (NO LOGS, NO INTERNET!!!) NCK Reader (levels.. pw1..7) for ALL BB5 RAPv3 and RAPIDO phones (including 9ddb new hash, together PA_SL1 and PA_SL2 phones)
- Unlocking Method is now being selected before unlock
- Added BB5 RPL Calc for PA_SL1 phones (using server) for Simlock Repair
- Few changes with BB5 booting, minor bugfixes, cosmetic changes, etc

!! FIRMWARE UPGRADE IS MANDATORY IN ORDER TO USE THIS UPGRADE !!
KEEP IN MIND STILL SOME PHONES (I.E. TELCELL MEXICO) CAN'T BE UNLOCKED USING NCK, THIS CASE USE FREE RPLS.

Avaiable Unlock Methods Now:

PM308 Recalculation (Standalone, Free)
NCK Calculation (Standalone, Free, New Method)
NCK Calculation (Standalone, Free, Old Method) Remark: Works only on SL2 Rapido Phones, SW < v30
RPL Calculation (Server Based, Need Credits)
(need select needed unlock method before unlock)

Download Link : http://rapidshare.com/files/340620565/Cyclone.exe

(REPLACE EXE at C:\Program Files\Cyclone Box\)

Cyclone BOMB ! Standalone : SX4 Emulation, SD Repair, RPL Calc, BB5 NCK Calc, more!!! (2010-02-12)

New version of Cyclone Box Software is ready. There is a lot of changes, here is some of them:


-WORLD'S UNIQUE : Standalone Superdongle Key Calculator Added! No internet, no logs, no time! Calculation time
-0.003 sec ! Works for any SL1, SL2 and SL3.


-WORLD'S UNIQUE : Standalone Unlocking/Relocking using RPL Added! No internet, no logs, no time! Calculation time
-0.002 sec ! Works for any SL1 and SL2.


-WORLD'S UNIQUE : Standalone SX4 Authorization Added! Box is now emulating Nokia SX4 card
-no need internet, no need logs to authorize ANY Nokia Phone, just box! Works for any SL1, SL2 or SL3. Emulated SX4 works with ORIGINAL NOKIA Superdongle keys (no need rebuild SD), Custom keys (made by Cyclone,MT,UB), etc. In case of Authorization fail, it will automaticly write and authorize using Custom Keys. Authoirzation time
-0.004 sec ! Supported are RAP and RAPIDO mcu, in case of RAPU phones SX4 Remote Card will be used. After authorization with Cyclone, PHONE STILL CAN be Authorized with ORIGINAL SX4 Card!


-WORLD'S UNIQUE
-Cyclone can now authorize Barred Phones (with Correct superdongle keys, but with higher KeyIndex ever used than 0 (possible KeyIndex 0..7), SX4 card can use any higher keyindex at time, when higher key is used, lower keys are automaticly not used in future, and phone requires to use higher key index)
-UB and other custom boxes can't do it as long SX4 emulation is not 100% Nokia-Like


-WORLD'S UNIQUE : Starting from now, Cyclone Box have ability to make _FULL RPL BACKUP_ of BB5 phones! Current existing SW on market creating only some part of RPL (NPC,HWC,Simlock)
-Cyclone is now backing up missing part:


-Added SUPER DONGLE KEY extracting (this Original Nokia one, so after writing it back phone still can be authorized with original SX4 card)


-Added CMLA KEY DATA extracting (That means created RPL File by Cyclone is now 100% SAME AS NOKIA'S ONE!)


-WORLD'S UNIQUE : Added BB5 MCU & DSP Timestamps Reader / Diagnostic Tool. This will help diagnostic of downgraded phone, will read Security Block, decode timestamps of current installed SW (and factory one, or Dejan Hack if exists) with FLASH installed MCU/DSP timestamps. Will have ability to FULL REBUILD downgrade security zone (dead06) soon.


-WORLD'S UNIQUE : BB5 Security Block Analyzer added, this will read Security Block and analyze it's health for content of following Security Data: SIMLOCK DATA, SUPERDONGLE KEY DATA, ECC KEYS DATA, DIV DATA, CMLA (DRM) DATA. Also it reads ST_SIMLOCK_TEST and ST_SECURITY_TEST and when problems occur, recommends actions.


-WORLD'S UNIQUE : Standalone BB5 Calculator Added. This calculated BB5 NCK (levels 1-7) for unlocking purposes. Calculated codes works only with phones which have been relocked with Cyclone Box. To calculate code is needed only IMEI
-no need cable, phone, flashbus logger, etc.


-WORLD'S UNIQUE : BB5 Unlock by NCk/RPL, SD Recalc, SX4 auth using USB !! (once log file readen)


-Upon box upgrade (maintenance) Bootloader in box is syncronized with server to avoid Activation Problems

-Bootagent server upgraded to 1.01, fixed "Box is not activated, ID 09)

-Fixed "Access Violation" when Cyclone Box SW is already launched and connection to box opened

-After BB5 Relock, unlock codes is displayed

-More detailed messages is now shown upon new NCK or RPL calculation

-BB5 Security Code Reading is moved to "UserArea" tab (needed space for MCU/DSP timestamp reading and security block analyzing)

-Total unlock/relock time added after operation is finished (thx to arash)

-Box Firmware version is now checked upon loading of Nokia Module
-if box firmware is obsolete, SW asks for upgrade and doing it automaticly

-Selected unlock method is now displayed before RootkeyHash support check

-Upon first reading of NCK Code (Extracting) or RPL Calculation, "CYC" log file is stored in "StoredFiles" and next time upon BB5 Security Actions (Calculation of SD, Extracting NCK, Calculating RPL (Relocking)) phone is no booted anymore and whole process took only 1 second!! Keep in mind calculated CYC file is paired with Box Serial number, so in case if your box serial number is changed-go to stored files and purge all "cyc" files.

-Decrypted AES Subblock of Security Block is now checksum checked (16 bytes checksum at end of block)

-Fixed "This is invalid integer..." when parsing phone with damaged IMEI

-When another copy of Cyclone Software is running, message is displayed instead of errors

-New method of NCK Calculation is now default BB5 unlocking method

-When New Method of NCK calculation is selected, PA_SL is not determined already (saves lots of time)

-Skin Manager updated to v6.54 (more stability)

-When BB5 RPL Don't contain Certificates (NPC,HWC) phone isn't booted

-Fixed bug when Flash RPL BB5 Data is being written two times

-Added more verbose debug messages when preparing Boot BB5 Phone

-Garbage characters when dealing with SLPA phones (#pw+___garbage___+1) bug fixed

-New splash screen added, thx to arash, again

-When Cyclone fails to boot APE subsystem, it shows hint about TX2

-APE subsystem is now no longer booted upon CheckFlashingBus

-Changed "Failed to write CMT Cert Data (3)" message, added TX2 information

-BB5 TX2 Line test added after "CheckFlashingBus"

-Before RPL Write, Software testing TX2 Line and when its faulty (not adapter) it showing apporiate message

-Writing BB5 CMT HWC Certificate from RPL fixed

-Parsing some Simlock Arrays (5130) produced garbage output
-fixed (thx to arash again)

-Added support for Cyclone Box HW Rev A11D
Just download EXE file and replace at C:\Program files\Cyclone Box\
Make sure Installer is installed aswell (this one from january, else you will have message RootkeyHash not supported).

You don't need any activations,logs to use this update.

Notes:
SX4 Emulation works offline and emulates SX4 card 1:1, in case of failure still server will be used.
BB5 NCK Calculator works for phone relocked by Cyclone Only (unlocking using IMEI only, no need know other data, just imei
-no need cable or connection to box too).
BB5 USB Unlocking and other security tools works only if phone log (by flashbus) is readen before.
Update is fast and most of security functions (sd,rpl) works very fast.
Don't forget to upgrade your Box Firmware to v01.21.
Download Link : http://rapidshare.com/files/349693053/Cyclone.exe